One pushbutton controls five shows via variables

by | | WEM | Script

CONTROL.INI – WEM | SCRIPT ™ CASE STUDIES   This project consists of five shows, which are controlled by one pushbutton. After each actuation of the pushbutton a new show is started.Therefore the command !vmc1=X# has to be inserted at the end of each show,...

Direct output control via variables and inputs

by | | WEM | Script

CONTROL.INI – WEM | SCRIPT ™ CASE STUDIES   The project consists of one show, which is triggered by each contact closure via input 1. Therefore the restart mode is required.In show 1 there are six variable decrement commands (!vmc-1#) with a time gap of one...

Three shows are controlled via three DMX channels

by | | WEM | Script

CONTROL.INI – WEM | SCRIPT ™ CASE STUDIES   This project consists of three shows and is controlled via three DMX channels.The first DMX channel starts the second show, the second DMX channel starts the first show and the third show is started via the third...

Six track, multi-language audio via variables

by | | WEM | Script

CONTROL.INI – WEM | SCRIPT ™ CASE STUDIES   The project has six different areas. Each area can be filled with four different recorded voice sounds, which are German, Spanish, French and English. The languages can be changed with a rotary switch. So 24 shows...

Three switches trigger three shows via variables

by | | WEM | Script

CONTROL.INI – WEM | SCRIPT ™ CASE STUDIES   The project contains three different show files, which are played in an interval of 90 minutes between 8 a.m. in the morning till 2 a.m. in the night. But only, if the key switch, which is connected to input 1 is...